Whether you’re a novice or expert, you should always have a small and large wrench handy for your projects. The proper size is determined by the size of the fastener, so it’s important to determine the appropriate sizes before beginning a project.
We’ll also look at the most common tools and their uses. You can use the information in this post to save time, money, and frustration when working on any type of fastener.
How to Find Standard Wrench Size Manually?
The correct wrench size for removing or installing bolts on a vehicle or any piece of equipment will save you a lot of time as you work. Most of the time, you have this information at your fingertips, but it’s not always easy to locate the data. It doesn’t matter whether you’re dealing with bolts or any other kind of fastener, if you want to determine the appropriate wrench size for a given fastener, you have two methods at your disposal.
Step 1
If you need to buy new bolts for your bicycle, read the size number given on the bolts’ package. This example is another illustration of how it may read: 1/2–10 UNC- 2A x1 3/4. A package containing metric-sized bolts will have an “M” before the first number.
Step 2
Multiply the number which is the diameter of the bolt in inches or millimeters, by
Here are a few examples of how to calculate wrench sizes: For the numbers in 1, 1/2 x
2.5 =.75 or 3/
That’s the wrench size needed for this standard-sized bolt.
Step 3
The diameter of the bolt hole that holds the wheel studs on your car needs to be measured. If you are unsure about the size of the bolt hole, measure the flat surface of the bolt head and use a standard ruler to determine the distance.
Step 4
If the bolt’s head is not accessible, use a set square and a carpenter’s framing square. Use a square edge to measure the outside diameter of the bolt’s threads. The vernier caliper is useful for measuring bolt heads that are not accessible.
Take a close look at each wrench size before you decide which one to use. Keep trying the different sizes until you find the one that fits snugly around the bolt’s head, if you don’t have access to a vernier caliper or a calculator. You must eliminate as much play between the wrench and the bolt’s head as possible to prevent damage to the bolt as you tighten or remove it.
Reference:
